Disassemble The Paper Cabinet Module - SNBC BTP-M300 Service Manual

4 4.2.5 Disass s emble the paper cabi net module
Picture P
Rem move the th
ST2 .6x6 screws
scre wdriver, and
and print bar.
Whe en the upp
remo ove the two
figur re with cross
mark k sensor and
e
1) Cut off the
cutter;
2) Remove th
the figure w
paper cabi
box.
Unsc crew the tw
scre wdriver and
off.
- 17 -
BT P-M300 Ser
hree ST2.9 9x6 screws
s shown in n the figure
d disassemb ble the uppe
per mark sensor is
o screws (S ST2.2x4) sh
s screwdrive er, and disas
d its dustpro oof cover.
Instructi ions
e cable ties of all wire
he four ST2 2.9x6 screw
with cross sc crewdriver, a
net module off from c
wo ST2.6x6 screws wit
d take the pa aper guide e
rvice Manu al
and three e
with cross s
er path plate e
configured, ,
hown in the e
ssemble the e
es with wire e
ws shown in n
and take the e
circuit board d
h the cross s
elastic plate e