Disassembly And Assembly; Maintenance Tools - SNBC BTP-M300 Service Manual

4 Disassembly and Assembly

Caution:
Do not disassemble, assemble or adjust the printer if it works properly. Do not unscrew any
screws unless necessary.
When disassembling and assembling, avoid damaging all wires and cables.
When handling the print head or electronic component, make sure to take some measures to
protect it from electrostatic charge.
During maintenance, be careful not to leave parts or screws loose inside the printer.
During maintenance, be careful not to damage the print head surface and the print bar.

4.1 Maintenance Tools

Maintenance Tools:
Cross screwdriver
Sharp-nose pliers
Wire cutter
Assistant materials:
Lubricant grease
Alcohol
Absorbent cotton
- 9 -
BTP-M300 Service Manual