Cutter Specifications; Paper Specifications; Parameters Of Label Paper - SNBC BTP-L580IIC User Manual

2.2 Cutter specifications

Item
Cutting mode Sliding blade
Cutting time
Cutting interval
Applicable
0.06～0.1mm
paper type
Operating
voltage
Max. operating
current
Only liner paper:
Cutter lifetime
1,500,000 cuts

2.3 Paper specifications

2.3.1

Parameters of label paper

Paper type: thermal label paper
Paper supply mode: paper roll
Thermal layer: outward
Paper reflectivity:
Label: reflectivity＜18%; base paper: reflectivity＞47%
Paper width: 54.5±0.5 mm~82.5±0.5 mm
Backing paper thickness: 0.041mm-0.071mm
Thermal paper (label) thickness: 0.070mm-0.092mm
Thermal paper (label) length: 35mm-300mm
Thermal paper (label) spacing: 3mm-10mm
Paper roll OD (Max): ф100 mm
Parameter
600ms The time that one cut takes
2s 30 cuts/min (Max.)
Thermal paper or paper with the same thickness
24VDC
1.2A 24VDC
The cutter should cut only the liner and not cut the liner together with
the label paper, otherwise it will negatively affect the lifetime of the
cutter
Remarks
- 3 -
BTP-L580IIC User's Manual