Disassemble The Printer; Disassemble The Printer Cover - SNBC BTP-M300 Service Manual

4.2 Disassemble the printer

4.2.1 Disassemble the printer cover

Picture
Top view of printer.
1) Remove the two screws (ST2.9x8) shown in
the figure with the cross screwdriver;
2) Take off the vertical pluggable interface board
shown in the figure.
1) Push out the power cover plate in the arrow
direction;
2) Take off the built-in power supply from its
location position.
- 10 -
BTP-M300 Service Manual
Instructions