Disassemble Hook; Disassemble Sensor; Disassemble The Paper End Sensor Module And Its Sensor - SNBC BTP-R880NPI Service Manual

4.2.11 Disassemble hook

4.2.12 Disassemble sensor

4.2.13 Disassemble the Paper End Sensor Module and its sensor

Take off the spring from paper house, and then rotate
it as the direction in left picture to take the hook out
from paper house.
Unscrew the two ST2.6*4 screws fixing the paper
sensor and take off the paper sensor out from the
paper house.
Disassemble the ST2.6*6 screw fixing the paper near
end latch and the spring washer and take off the
paper near end latch from the paper house.
- 18 -
BTP-R880NPII Service Manual