Disassembly And Assembly; Maintainance Tools; Disassemble The Printer; Disassemble Bottom And Top Covers - SNBC BTP-R880NPI Service Manual

4 Disassembly and Assembly

Caution:
1) Do not disassemble any parts of the printer or loosen any screw if it works properly;
2) When disassembling parts, please check carefully if the connecting lines are damaged or not;
3) When handling the thermal print head or electronic components, please make sure to use
antistatic gloves or bracelet;
4) During the disassembly, be careful not to leave small parts or screws inside the printer;
Don't scratch the print head surface.
5)
Assistant material: Lubricant, alcohol, absorbent cotton.

4.1 Maintainance tools

 Screw Driver(Philips type)
 Screw Driver (line type)
Wire clamp pliers


4.2 Disassemble the Printer

4.2.1 Disassemble bottom and top covers

1.
2.
Figure
Top view of printer
Press the latch of the top cover and open it;
disassemble two ST2.6×6 self tapping screws.
- 10 -
BTP-R880NPII Service Manual
Instruction