Printer Mount; Unpacking; Fixing The Printer - SNBC BT-UC156 User Manual

4. Printer mount

4.1 Unpacking

When unpacking, check if parts are short or damaged according to packing list. Once this case happens,
please contact with your local distributor or SNBC.

4.2 Fixing the printer


This printer has fixing hole and side cover fixing hole. You should select suitable space and fixing
position of the printer referred to figure 4.2.1
Caution:

The printer should be mounted on a fixed plane less than 0.5mm flatness;

It is recommended that the slanting range for horizontal mount should be -10º≤B≤10º;

Do not place the printer on a surface exposed to vibration or risk from impact;

The part of screws entering the printer shall not be longer than 5 mm;
Figure 4.2.1 Dimension
- 6 -
BT-UC156 User's Manual