Schulte SRW1400 Operator's Manual page 75

Pivoting rock windrower

Table of Contents

Allow sufficient clearance for the Implement to swing outward while turning. Implements

carried behind the Tractor will swing outside the tire path when making turns. Contacting a

solid object while turning will cause equipment damage and possible injury.

Be particularly careful when transporting the Implement using the tractor. Turn curves or

go up or down hills only at a low speed and at a gradual steering angle. Make certain that

at least 20% of the tractor's weight is on the front wheels to maintain safe steerage. Slow

down on rough or uneven surfaces.

Only tow the Implement behind a properly sized and equipped Tractor

which exceeds the weight of the Implement by at least 20%.

tow the Implement behind a truck or other type of vehicle. Never tow the

Implement and another Implement connected in tandem. Never tow the

Implement at speeds over 20 MPH.

Secure the Implement for transport before traveling on public roads.

Implements, secure the center axle using cylinder stops or transport pin and properly attach

a safety chain between the Implement and Tractor. Secure wings in upright position on

folding Implements using wing transport locks.

SRW1400 08/16

OPERATION

(STI-01)

(STI-06)

Operation Section 4-37

DO NOT

(STI-7)

(S3PT-20)

For pull-type

Table of Contents