Schulte SRW1400 Operator's Manual page 28

INTRODUCTION
Your SRW1400 is designed to windrow small to medium surface rocks, roots, stumps,
and other debris in the fields. The SRW1400 windrower can also be used for reclaiming
gravel from road sides. Check local regulations before operating on road ways. With
proper maintenance as described in this manual, your SRW1400 windrower will provide
you with years of dependable service with a minimum of repairs.
It is required that all operators of this implement read this manual or be instructed of its
contents as to safety, proper operation, and maintenance before beginning operation.
Your windrower has been assembled for operation with a tractor PTO input speed of 540
RPM.
When ordering replacement parts for the Gearboxes and the Drivelines, be sure to specify the serial number.
The serial number is located on the left hand side attached to the SRW1400 hitch pole.
Driveline Integral Shields, and Gearbox Shields are standard equipment and are to be used at all times.
To place the warranty into effect, fill out the warranty card in full, giving all the requested information, and mail
promptly. Be sure to give the serial number of the SRW1400.
SRW1400 08/16 Introduction Section 2-2
© 2016 Alamo Group Inc.