Operating Panel Description - Simrad SN90 Operator's Manual

Simrad SN90 Operator Manual

Operating Panel description

The SN90 Operating Panel is the most important device for fast and efficient user
interface.The Operating Panel offers all necessary control functions for normal operation
of the SN90.
The controls provided by the Operating Panel are arranged in logical functional groups.
This offers you clear and easy operation with fast access to key functionality. The
majority of the SN90 functions can be accessed using the trackball on the Operating
Panel and the menu system shown in the SN90 presentation. The Operating Panel allows
you to assign certain functions to dedicated buttons and switches.
Tip
A USB socket is provided in the top left corner of the Operating Panel. Use this socket to
connect a computer keyboard, a mouse or a USB flash drive.
: Press this button to turn the SN90on and off.
A
Power
• Before you turn on the SN90, make sure that you have sufficient water depth to
lower the transducer!
• You must never turn on the SN90 when the ship is in dry dock. The transducer
may be damaged if it transmits in open air.
• You must never turn off the SN90 by means of the on/off switch on the Processor
Unit. You must ALWAYS use the Operating Panel.
: Since the Operating Panel uses Ethernet to communicate with the
B
Sonar Select
Processor Unit, you can use one single panel to control more than one sonar system.
To change which sonar to control, press
you use your Operating Panel to control more than two sonars, press
repeatedly to select.
: Press one of the
C
User Settings
setting. To choose which function to apply open the
22
Sonar Select
buttons to apply a predefined user
User Settings
on the Operating Panel. If
Sonar Select
page.Under
Operating Panel
381295/B