Table of Contents
Advertisement
Simrad SN90 Operator Manual
Rearranging the layout of the SN90 presentation
Each operating mode is presented with a set of views. These are placed at different
positions with different sizes. With the
the views in the SN90 presentation.
Context
The physical location and size of each view can be changed individually. The content
in a view that changes size will automatically be adjusted to take full advantage of
the space available.
Procedure
1
We recommend that you first save your current user settings.
When a complete reorganisation of the view positions and sizes have been
completed , you may wish to restore the SN90 presentation to what it was before you
changed it. You must use the
you save your current user settings before you activate the
a
Observe the
b
Select
User Settings
c
Select
Save Current Setting
d
Type a name for the user setting.
e
Select
OK
f
Select
OK
2
Open the
Display
3
Set
Docking Views
4
Click in the title bar of the view that you want to move.
The frame of the selected view will change colour to indicate that it has been
selected.
5
Press the mouse button, and keep it depressed to drag the selected view to another
position in the SN90 presentation.
The docking positions show you where to drag and drop the selected view. Any
view can selected, and then repositioned as indicated by the docking positions.
Related topics
Setting up presentation modes and views, page 93
Moving a view to another display, page 93
Restoring the locations and sizes of the views, page 95
94
Docking Views
User Settings
menu.
Main
.
.
to save the chosen name.
to close the dialog box.
menu.
to On.
function you can move and re-size
dialog box to do this. We suggest that
Docking Views
function.
381295/B
Advertisement
Table of Contents
