Table of Contents
Advertisement
Deleting user settings that are no longer used
When you save the user settings, the files you have created are shown on the
list. The list may be too long. User settings that you do not need can be deleted.
Settings
Context
The
dialog box is used to store your favourite SN90 settings. These settings
User Settings
can be related to different operations, environmental conditions or basic personal
preferences. You can use different settings to create as many user profiles as you like,
and give them any name. All the settings you have chosen using functions and dialog
boxes in the SN90 user interface are saved. To delete a user setting, select its name in the
list, and then select
Delete
Note
There is no "undo".
Procedure
1
Observe the
Main
Its default location is on the right side of the SN90 presentation.
2
Select
User Settings
Observe that the
3
Observe the list of previously saved user settings in the
4
Select the setting you wish to delete.
5
Select
.
Delete
A small dialog box opens so that you can verify your choice. There is no "undo".
6
Observe that the name you have chosen is removed from the
7
Select
to apply your changes and close the
OK
Related topics
Saving, retrieving and handling user settings, page 114
381295/B
. The factory settings can not be deleted.
menu.
.
dialog box opens.
User Settings
Operating procedures
Saved Settings
Saved Settings
dialog box.
User Settings
Saved
list.
list.
117
Advertisement
Table of Contents
