Table of Contents
Advertisement
Restoring the locations and sizes of the views
If you have used
Docking Views
must use
User Settings
Context
With the
Docking Views
presentation. When a complete reorganisation of the view positions and sizes have
been completed , you may wish to restore the SN90 presentation to what it was before
you changed it.
Procedure
1
On the
menu, select
Main
2
Select the default settings.
Note
These settings are the default values provided with the Simrad SN90. All current
settings are lost when the default factory settings are applied. There is no "undo".
3
Select
Activate Selected Setting
Result
All views are placed back to their original positions and sizes.
Related topics
Setting up presentation modes and views, page 93
Moving a view to another display, page 93
Rearranging the layout of the SN90 presentation, page 94
381295/B
to rearrange the position and size of your views, you
to restore all the views to their default positions.
function you can move and re-size the views in the SN90
User Settings
.
.
Operating procedures
95
Advertisement
Table of Contents
