Table of Contents
Advertisement
Simrad SN90 Operator Manual
2
Set
to Replay.
Operation
The replay bar opens automatically. It is positioned directly below the top bar at the
top of the SN90 presentation.
If you need to select which files to replay, select
button. You can also select the large button in the middle of the replay bar.
3
Select
Play/Pause
4
To stop the replay choose any other operating mode.
Related topics
Choosing operating mode and key transmit parameters, page 55
Selecting Normal mode to start "pinging", page 55
Selecting Inactive mode, page 57
Recording and replaying echo data, page 87
Choosing which echo data file(s) to replay, page 90
Choosing which echo data file(s) to replay
Every time you record echo data, the information is stored on the Processor Unit hard
disk. Depending on your initial settings, the files may also be stored on a USB hard
disk or even a network disk. The echo data files can be retrieved, and played back on
the SN90.
Context
All playback is controlled by the replay bar.
: Select this button to stop the playback.
A
Stop
: Select this button to start the playback, or to pause it.
B
Play/Pause
: Select this slider and move it sideways to adjust the replay speed.
C
Replay Speed
D
: The button shows you which file you are replaying. Select the button to
Replay File
open the
Replay File
E
Playback Progress
you have chosen to restart the replay file(s) automatically (in a loop), the green
indicator starts from left every time the file restarts.
90
to start the playback.
dialog box.
: This bar shows you the progress of the replay sequence. If
under the
Replay File
Operation
381295/B
Advertisement
Table of Contents
