Recording Echo Data - Simrad SN90 Operator's Manual

Simrad SN90 Operator Manual
Procedure
1 Open the
Operation
2 Locate the
Record
3 Select the middle of the button to open it and access the available options.
4 Select
File Setup
5 Choose the required settings.
6 Select to save the selected settings and close the dialog box.
OK
Related topics
Recording and replaying echo data, page 87
Recording echo data, page 88

Recording echo data

Use the data recording functionality provided by the SN90 to save echo data. The data
files can be copied or moved to an external storage device. You can keep the recorded
files for future reference, or for training purposes. The recording is controlled by the
function.
Record
Prerequisites
Before you start data recording, make sure that you have defined where to store the
files. To define which disks and folders to use to save the data files, select
If you wish to save your recorded data on an external hard disk, make sure that it is
connected to the Processor Unit.
Tip
You are permitted to define the maximum file size for each recorded file.
Context
Unless you really need to record data for playback and/or training purposes, you should
use this function with care. The data files will fill you hard disk very fast!
Note
The data files will normally become very large. If you wish to record large amounts of
SN90 data, make sure that you have enough space on your hard disk. The SN90 is not
provided with unlimited disk capacity. We recommend that you save the data files to an
external storage device.
88
menu.
button.
to open the dialog box.
.
File Setup
381295/B