Controls And Indicators - CareFusion Alaris GP Guardrails Directions For Use Manual

Controls:
Symbol
a
b
h
c
i
d
e
f
g
Indicators:
Symbol
S
j
Controls and Indicators
ON/OFF button - Press once to switch the pump ON. Press and hold down for
approximately 3 seconds to switch the pump OFF.
RUN button - Press to start the infusion. The green LED will flash during
infusion.
HOLD button - Press to put the infusion on hold. The amber LED will be lit
while on hold.
MUTE button - Press to silence alarm for (approximately) 2 minutes. The alarm
will resound after this time.
BOLUS button - Press to access BOLUS softkey. Press and hold down softkey
to operate.
BOLUS - fluid or drug delivered at an accelerated rate.
• Pump is infusing
• Infusion set is connected to patient.
• Volume infused (VI) is added to the total volume infused displayed.
OPTION button - Press to access optional features.
PRESSURE button - Use this button to display the pumping pressure and
adjust the alarm limit.
CHEVRON keys - Double or single for faster / slower increase / decrease of
values shown on display.
BLANK SOFTKEYS - Use in conjunction with the prompts shown on the
display.
AC POWER indicator - When illuminated the pump is connected to an AC
power supply and the battery is being charged.
BATTERY indicator - When illuminated the pump is running on the internal
battery. When flashing the battery power is low with less than 30 minutes of
use remaining.
1000DF00498 Issue 3 5/42
Description
Description