Table of Contents
Advertisement
To create a data set for the Alaris® GP Guardrails® Volumetric Pump, first the hospital will need to develop, review, approve, upload according
to the following process. Refer to the Guardrails® Editor help file for further details and operating precautions.
1. Create care area data set (Using Guardrails® Editor)
Profile
Pump Configuration
Drug List
2. Review, approve and export data set (Using Guardrails® Editor)
Review and Approve
Export
3. Upload data set to Alaris® GP Guardrails® Volumetric Pump (Using Data Set Transfer Tool)
4. Verify that the correct data set is loaded into the pump and accept it.
5. Switch the pump off. The pump is now ready to use.
6. Switch the pump on and verify that the software version screen displays the correct data set version.
A
D ata set transfers should only be performed by qualified technical personnel.
The pump serial number and the hospital name are stored in the event log.
Drug parameters have to be in accordance with local regulation and prescribed information.
Creating a Data Set
A unique set of configurations and best-practice guidelines for a specific population,
patient type or care area.
Each profile consists of: Pump Configuration / Drug List
Up to 30 profiles can be defined for each Data Set.
Pump configuration settings and units for dosing only.
Drug names and concentrations for a data set with default value and maximum
limits.
Up to 100 unique drug names/drug protocol set-ups.
Entire data set report to be printed, reviewed and signed as proof of approval by an
authorised person, according to hospital protocol. Signed printout to be kept safe
by hospital. Data set status to be set to Approved (Password is required).
Export data set for use by the Data Set Transfer Tool, or to back up a data set, or to
move the data set to another PC.
1000DF00498 Issue 3
3/42
Advertisement
Table of Contents
