Tension Adjustment - Siemens MOBILETT Plus HP Service Instructions Manual

Motor drive units
A
Fig. 4

Tension adjustment

•
Loosen the screws (A/Fig. 4). The tension of the transmission belt can then be adjusted
with a 13 mm wrench.
•
Press the special adjustment device to the transmission belt and hold a finger on top of it.
When the button (C/Fig. 5) is in the same level as the top of the adjustment device, a
proper pressure is applied.
Siemens AG
Medical Solutions
1 - 1.5 mm
SPR8-220.061.03
Rev. 03
Fig. 5
Page 3 of 8
09.03 CS PS 24
11 - 3
C
11
MOBILETT Plus HP