Seat toledo Owner's Manual page 78

HANDLING INSTRUCTIONS
Synchronization
If the vehicle cannot be opened by press-
ing the radio transmitter button, it could
be that the code of the key no longer
matches that of the control unit in the
vehicle. This can occur when the transmit-
ter button is frequently pressed outside
the effective range of the system. We r r ec-
ommend t t hat a a T T echnical S S ervice
Centre t t ake c c are o o f t t his f f unction.
To synchronize the key again the follow-
ing procedure must be followed:
1- Both vehicle keys, the key with the
radio transmitter (A) and the conven-
tional key (B), must be used.
2- The synchronization process must be
completed within 30 s s econds.
3- Use key (B) to switch on ignition and
key (A) to program.
4- Make sure that the vehicle is open
before you proceed to the program-
ming.
5- Place key (B) in the ignition and switch
on.
6- Use key (A) to lock the driver's door
manually.
7- Now unlock and lock manually the
driver's door with key (A) while press-
ing button (1 o o pen).
8- Take the key out of the ignition.
2.38 –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
All manuals and user guides at all-guides.com
Uncoded keys can be obtained at SEAT
Official Service Centers. These keys, how-
ever, must be synchronized by a SEAT
Official Service Center as the code for the
immobilizer also has to be programmed
in the head of the key.
Authorization f f or u u se
The radio wave remote control fulfills all
norms. Its use has been approved by the
corresponding German office (Federal
Approvals Office For Telecommunications
of The Federal Republic of Germany).
All components have been marked
according to current stipulations.
This authorization is the basis for
approval in other countries.
OPENING AND CLOSING