TIPS AND MAINTENANCE
A – – D D ipped b b eam b b ulb
•
Open bonnet.
•
Remove cover, loosening screws 1 ..
•
Unhook spring clips 2 in direction of
arrow and fold away.
•
Pull out the plug of the bulb cable.
•
Release the retaining spring and pull it
away.
•
Take bulb out and insert new bulb so
that the locating lug on the bulb plate
engages the recess in the reflector.
•
Fold spring clip over the bulb plate until
the clip engages.
•
Connect plug.
•
Place cover into guide.
•
Have the headlight beam alignment
checked.
3.76
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
All manuals and user guides at all-guides.com
TO8-046
B – – M M ain b b eam b b ulb
•
•
•
arrow and fold away.
•
•
away.
•
that the locating lug on the bulb plate
engages the recess in the reflector.
•
the clip engages.
•
•
•
checked.
Open bonnet.
Remove cover loosening screws 1.
Unhook spring clips 2 in direction of
Pull out the plug of the bulb cable.
Release the retaining spring and pull it
Take bulb out and insert new bulb so
Fold spring clip over the bulb plate until
Connect plug.
Place cover into guide.
Have the headlight beam alignment
TO8-044B
IF AND WHEN