Seat toledo Owner's Manual page 163

Hide thumbs Also See for toledo:
Table of Contents

Advertisement

Operations i i nstructions
The removable ball coupling of the tow-
ing bracket* may be stored in the tool box
located inside the spare wheel recess.
Additional mirrors are required if the
traffic behind the trailer is not visible with
the exterior mirrors fitted as standard.
Both exterior mirrors must be attached to
brackets in such a way that a sufficient
field of vision to the rear is guaranteed at
all times.
The permitted trailer weight must not
be exceeded under any circumstances.
See chapter "Technical Data".
YOUR VEHICLE AND THE ENVIRONMENT
All manuals and user guides at all-guides.com
–––––––––––––––––––––––––––––––––––––––––––––––––
TIPS AND MAINTENANCE
When using a trailer on mountain
routes you must bear in mind that the tow
loads given in the "Technical data" chap-
ter are only applicable for slopes of 10%
to 12%. If you do not use the full tow load
you may drive up steeper slopes.
The given trailer weights are only applic-
able for altitudes up to 1000 m above sea
level. As the engine output drops due to
the decreasing air density, the climbing
ability must also be reduced by 10% for
each further 1000 m.
Where possible make full use of the
maximum permissible drawbar weight on
the ball of the towing bracket but do not
exceed it. See chapter "Technical Data".
While observing the permissible trailer
and drawbar weight, distribute the load in
the trailer so that heavy objects are as
near as possible to the axle. The objects
must also be secured so that they cannot
slip about.
3.21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents