C – – S S ide l l ight b b ulbs
•
Open the bonnet.
•
Remove the cover, loosening screws 1 .
•
Unhook spring clips 2 in direction of
arrow and fold away.
•
Remove bulb holder from the reflector.
•
Take bulb out.
•
Fit the new bulb.
•
Insert bulb carrier into reflector.
•
Replace plastic cover.
IF AND WHEN
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
All manuals and user guides at all-guides.com
TO8-044C
TIPS AND MAINTENANCE
D – – I I ndicator b b ulb
•
Open the bonnet.
•
Remove the cover, loosening screws 1 .
•
Unhook spring clips 2 in direction of
arrow and fold away.
•
Disconnect the connector, pressing the
spring tab.
•
Turn holder to right and remove it from
its housing.
•
Turn the bulb to the left and replace it.
•
To re-assemble do the same steps in
the reverse order.
•
Plug in the connector
•
Replace the plastic cover.
TO8-044D
3.77