Seat toledo Owner's Manual page 49

Memory
The system is equipped with two memo-
ries which function automatically.
A p p artial r r oute m m emory ( ( Multifunction
Indicator 1 1 ) gathers the following data
between switching the ignition on and
off:
Driving time, distance covered and used
fuel.
Speed and average fuel consumption are
calculated using the above information.
If driving is resumed within two hours
from switching off the ignition, the data
collected while driving is included in the
calculation. If driving is not resumed
within two hours, the memory is automat-
ically deleted.
A t t otal r r oute m m emory ( ( Multifunction
Indicator 2 2 ) collects driving data from
any number of partial routes up to a total
of 100 driving hours, 10,000 kilometres
and a fuel consumption of 1,500 litres.
This data is used to calculate average
consumption and speed from all partial
routes.
INSTRUMENT PANEL ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
All manuals and user guides at all-guides.com
HANDLING INSTRUCTIONS
If some of the before mentioned data is
exceeded, the memory is deleted and the
calculation starts over. Contrary to the
partial route memory, this memory is not
deleted when driving is interrupted for
more than two hours.
Consult m m emory
To consult data select the memory by
pressing the "Reset" key for < 2 seconds
and from one of the specific Multifunction
Indicator 1 or 2 functions.
– Partial route memory - Multifunction
Indicator 1
– Total route memory - Multifunction
Indicator 2
The following data can be displayed:
•
Driving time
•
Distance covered
•
Average speed
•
Average fuel consumption
Delete m m emory
Memory data is reset by pressing the
"Reset" key for > 2 seconds.
2.9