Seat toledo Owner's Manual page 77

Opening a a nd c c losing t t he v v ehicle
To unlock the vehicle, point the key from
within the effective range at the vehicle
and briefly press the "open" button
(arrow 1). The indicators will flicker. To
lock the vehicle, briefly press the "close"
button (arrow 2). The indicators flicker
once.
If you press the "close" button (arrow 2)
twice, the dead-lock mechanism
anti-theft alarm are deactivated and the
indicators do not work.
Selective U U nlocking
Press the opening button (arrow 1) once
to open only the driver's door, leaving the
rest closed.
Press the opening button (arrow 1) twice
to open all doors.
Notes
When the close or open buttons are
pressed a warning lamp will flash in the
key. If this lamp does not flash, the bat-
tery in the key might be discharged. In
this case a Technical Service Centre
should check or change the battery.
OPENING AND CLOSING
All manuals and user guides at all-guides.com
LEO-009
and
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
HANDLING INSTRUCTIONS
When the dead-lock mechanism and the
anti-theft alarm* are activated, proceed
as follows:
If the vehicle is unlocked by using the
open button on the radio-frequency
remote control*, all of the doors and the
1)
boot will be relocked automatically if
they are not opened within 30 seconds.
However, the locking security system and
the anti theft alarm will remain deacti-
vated during these 30 seconds. This func-
tion prevents the vehicle being acciden-
tally o o pen within
radio-frequency remote control.
1)
The alarm and dead-lock mechanism will remain
in the same position as before opening.
range of the
2.37