Wi-Fi Settings, Wireless Client, Peap - Barco CX-20 Installation Manual

Hide thumbs Also See for CX-20:

Table of Contents

CX-20 Configurator

Image 6–22 Wi-Fi Settings, Wireless Client, EAP-TTLS

6.14 Wi-Fi settings, Wireless Client, PEAP

About PEAP

PEAP (Protected Extensible Authentication Protocol) is an EAP implementation co-developed by Cisco

Systems, Microsoft and RSA Security. It sets up a secure TLS tunnel using the servers CA certificate after

which actual user authentication takes place within the tunnel. This way of working enables it to use the

security of TLS while authenticating the user but without the need for a PKI.

The standard does not mandate which method is to be used to authenticate within the tunnel. But in this

application note, with regard to PEAP, we are referring to PEAPv0 with EAP-MSCHAPv2 as the inner

authentication method. This is one of the two certified PEAP implementations in the WPA and WPA2

standards – and by far the most common and widespread implementation of PEAP.

How to start up for PEAP

Select PEAP from the drop down list next to Authentication Mode.

R5900102 /04

CX-20

Table of Contents