Clickshare Windows Certified Driver; Clickshare Desktop App - Barco CX-20 Installation Manual

Preparing the Buttons
msiexec. exe /i
INSTALLFOLDER=C:\ LAUNCH_APP=YES /qn
Extended desktop only install :
msiexec. exe /i
ADDLOCAL=ExtendedDesktopDriverFeature INSTALLFOLDER=C:\ LAUNCH_APP=YES /qn
Full install (laucher + extended desktop):
msiexec. exe /i
ADDLOCAL=ALL INSTALLFOLDER=C:\ LAUNCH_APP=YES /qn
The computer will reboot. This can be suppressed with /norestart. A reboot will be needed
afterwards for the extended desktop feature to be working. In case the end-user should decide if
they want to reboot, /promptrestart /QB!+ can be used (basic UI, no cancel option, but prompt to
reboot)
Parameter Description
ACCEPT_EULA
INSTALLFOLD-
ER
LAUNCH_APP
/qn
ADDLOCAL
Windows environment variable
The variable to be used is CLICKSHARE_LAUNCHER_CLIENT_PATH. The value should be the path to the
client software.

5.4 ClickShare Windows Certified driver

About
The ClickShare Windows Certified driver is auto-installed when plugging in a Button in a Window PC.
This Windows driver automatically lauches the executable on the Button.
Note that at least version 1.20.0 is required in order to support Buttons with firmware version 4.10 or higher. In
case an older version is installed on your PC, start windows update check for updates with a button inserted
into your PC. On Windows 7, 8 and 8.1 computers, the driver will have to be manually downloaded and
installed.

5.5 ClickShare Desktop App

About
With the ClickShare Desktop App installed on your computer you can enter a meeting room and get on the
screen in a few seconds without the need to plug in a Button. The ClickShare Desktop App can be used in
combination with a Button.
The ClickShare Desktop App connects to the meeting room screen in order to share your content. Presence
detection technology is used to do so. The ClickShare Desktop App uses presence detection technology to
determine which meeting room is closest to the user. Just click on your meeting room name. This means you
will never have to enter IP addresses or scroll long lists of meeting rooms before being connected to your
54 R5900102 /04 CX-20
ClickShare-Extension-Pack-01.00.02.0003. msi
ClickShare-Extension-Pack-01.00.02.0003. msi
ClickShare-Extension-Pack-01.00.02.0003. msi
This parameter shows that the installer accepts the EULA text as is. This parameters
must be set to YES in order to continue to the installation.
This parameter specifies the installation directory for ClickShare launcher. If not
specified, the default folder will be the Program Files folder.
The ClickShare launcher application will be started right after the installation finishes if
this parameter is set to YES. Otherwise, the launcher application will not be started.
This parameter indicates that the installation will be done in silent mode, meaning that
there will be no visible windows during the installation.
This parameter indicated the type of the installation. No parameter added, installs only
the launcher.
ACCEPT_EULA=YES
ACCEPT_EULA=YES
ACCEPT_EULA=YES