Standalone Setup - Barco CX-20 Installation Manual

CX-20 Installation
Image 4–2
Mounting with the self-adhesive layer
1. Peel off the removable protection foil.
Image 4–3
2. Stick the base on the chosen location.
3. Place your device on the mounting base and turn it clockwise until it is locked

4.5 Standalone setup

Overview
This setup is the simplest in terms of installation and can be used for temporary setups and in organizations
where central management and 3rd party integration are not required.
The ClickShare Base Unit and Button (s) operate directly out of the box, without any integration in the
Enterprise network. It is advised to connect the Base Unit at least once to the internet in order to check for
updates and register your device for SmartCare. Users can connect directly to the Base Unit via the
ClickShare Buttons, after the Button are paired to the Base Unit, or using the ClickShare App or Miracast or
with their mobile devices using Airplay or Google Cast.
32 R5900102 /04 CX-20
(Image 4–2).