Video Signal Connections To The Base Unit; Camera Connection - Barco CX-20 Installation Manual

CX-20 Installation
With just one click in the ClickShare App you join the next virtual meeting on your agenda. Your Outlook
calendar automatically synchronizes with the ClickShare Collaboration App. The next Microsoft Teams
meeting on your agenda is shown in the ClickShare App: join that call with just one click, your Teams App will
open automatically and your call will start immediately. The same is true for your Zoom, Webex or other calls
as well.
One click to share your content. Start sharing content in a Microsoft Teams, Zoom or Webex call and
ClickShare automatically shares the same content to the meeting room display.
Audio only room
Audio only rooms have just a combined speaker - microphone system connected via USB.
When connecting with the Button or ClickShare desktop app, it allows you to connect the room speakerphone
and microphone to your laptop for use in a conferencing call.
Video only room
Video only rooms have just an USB camera connected to the Base Unit.

4.9 Video signal connections to the Base Unit

About Video signal connection
A single screen can be connected to the Base Unit.
To connect a display, an HDMI connection should be made between the Base Unit and the display.
To connect
1. Connect the Base Unit to the display using a display cable.
Note: No display cables are included in the ClickShare box at purchase.
When setting up a display configuration, connect the HDMI cable to the display. When necessary, use an
adapter piece to connect to a display port or a DVI port on the display side.
Image 4–8 Display connection

4.10 Camera connection

About USB cameras
Any USB camera with at least a resolution of 720p can be connected to the Base Unit. A list of supported
cameras can be found on Barco's website.
To connect
1. Connect the camera via USB to the Base Unit.
36 R5900102 /04 CX-20