Buttons, External Access Point, Mode Wpa2-Psk; Blackboard - Barco CX-20 Installation Manual

6.34 Buttons, External access point, mode WPA2-
PSK
How to fill out the settings
1. Fill out a Corporate SSID.
Image 6–48 Buttons, External access point, mode WPA2-PSK
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
2. Fill out Passphrase.
The key used in WPA2-PSK to authenticate onto the wireless infrastructure. This can be a string of 64
hexadecimal digits or a passphrase of 8 to 63 printable ASCII characters.
3. Click Save changes to save the settings.

6.35 Blackboard

About Blackboard
Saving information from a blackboard can be enabled or disabled. When enabled, the information is saved on
hard disk of all connected Buttons, connected ClickShare apps and on the USB sticks connected with the
Base Unit.
How to change the blackboard setting
1. Log in to the Configurator.
2. Click System → Blackboard.
CX-20 Configurator
R5900102 /04 CX-20 101