Out-Of-The-Box Use Of The Base Unit With Ethernet Link; Video Signal Connections To The Base Unit - Barco ClickShare CX-20 set Gen 2 Installation Manual

requires the least installation effort and keeps any shared data completely separated from your Enterprise
network. Updating and configuring the Base Units will need to be done manually.
4.5 Out-of-the-box use of the Base Unit with
Ethernet link
Overview
In this extended out-of-the-box mode, an Ethernet connection is made between the ClickShare Base Unit and
the corporate network. The ClickShare Base Unit Wi-Fi is kept enabled, ensuring users can still connect
directly to the Base Unit via the ClickShare Buttons, using the ClickShare App, Miracast, Airplay or Google
Cast. Employee computers running the ClickShare App and employee mobile devices using Airplay or Google
Cast can connect via the corporate LAN.
Using a ClickShare Button allows guests to stay connected to the Guest LAN and thus retain internet
connectivity. Guest mobile devices will usually need to connect to the Base Unit directly and will only be able
to access the internet if the device supports to use data (3G/4G) at the same time.
A
D
E
F
Image 4-5: Out-of-the-Box use with Ethernet link
A Meeting room screen
B Employee mobile
C Guest mobile
D Employee laptop
Using the ClickShare Base Unit and Buttons directly out of the box is ideal for temporary setups, visitors'
centers and small to medium installations without network integration needs. The Ethernet connection allows
employees to use the ClickShare App without switching their Wi-Fi network.

4.6 Video signal connections to the Base unit

About Video signal connection
A single screen can be connected to the Base unit.
To connect a display, an HDMI connection should be made between the Base Unit and the display.
To connect
1. Connect the Base unit to the display using a display cable.
B
G
E Guest laptop
F Wireless or Ethernet connection
G Ethernet connection
H Wireless connection
CX-20 Installation
C
D
E
H
R5900102 /00 CX-20 35