Video Signal Connections To The Base Unit - Barco CX-20 Installation Manual

CX-20 Installation
Image 4–8
Limitations when not using the ClickShare Button to connect:
When connected using the ClickShare Desktop App, without the ClickShare Button plugged-in, your
experience is limited to the collaboration capabilities available on ClickShare. You will not be able to use the
room camera, room speakers, microphone or speakerphone for wireless conferencing until a ClickShare
Button is plugged-in.
Audio only room
Audio only rooms have just a combined speaker - microphone system connected via USB.
When connecting with the Button or ClickShare desktop app, it allows you to connect the room speakerphone
and microphone to your laptop for use in a conferencing call.
Video only room
Video only rooms have just an USB camera connected to the Base Unit.

4.9 Video signal connections to the Base Unit

About Video signal connection
A single screen can be connected to the Base Unit.
To connect a display, an HDMI connection should be made between the Base Unit and the display.
To connect
1. Connect the Base Unit to the display using a display cable.
Note: No display cables are included in the ClickShare box at purchase.
When setting up a display configuration, connect the HDMI cable to the display. When necessary, use an
adapter piece to connect to a display port or a DVI port on the display side.
36 R5900102 /02 CX-20