Rtsp; Notification Setup; Schedule - Idis DR-6100P Series Operation Manual

RTSP

RTSP service allows you to monitor real-time using the
Real-Time Streaming Protocol.
● RTSP Port: Set the port number of the RTSP server
obtained from your system administrator.
● RTP Port: Set the start/end port number of the RTP
server obtained from your system administrator.
• You can access a remote NVR and monitor
live video images using media players, such
as VLC Player, supporting RTSP service. Start
the media player on your local PC and enter
"rtsp://ID:Password@IP address:RTSP port
number/trackID=channel number" (e.g.: rtsp://
admin:@10.0.152.35:554/trackID=1)When you
change the usage to anything other than ALL or
Clip-Copy, the FTP notification function will be
disabled.
• Video display on certain media players may not
be smooth depending on the network status.
• RTSP service might not be supported, depending
on the type of media player.

Notification Setup

Schedule

Select the + icon at the lower left corner of the screen to
add a notification schedule.
● Day: Add different schedules for different days of the
week.
● Range: Change the event notification time frame.
● Notify: Select which notifications to generate when
an event occurs. Select Mail, LAN 1 through 5, SNS,
Push, and/or Summary.
• In order to use the Notification (Callback) feature,
the NVR must be registered on the remote program.
• Select the icon to delete the existing schedule.
● Summary Email Interval: Transmit event summary
emails to a remote destination at specified intervals.
Part 2 - Configuration
71