Part 3 - Search
Time-Lapse Search
While in Live mode, select the Search Mode
Search.
When using Use 2FA, you can access the search menu only after the mobile device on NVR must be authenticated. For more
information on 2FA function, refer to the Use 2FA on page 35.
1
Select Setup while in Search mode to display a menu from which you can select Control Area.
2
Press Setup once more to move the Control Area.
3
In 2 seconds after moving the Control Area, the Control Area becomes selected and the corresponding menu
disappears.
4
After selecting the desired Control Area, use the arrow buttons on the front panel or the remote control to select
the menus and options. Search menu can also be displayed by placing the mouse cursor on the upper portion of
the screen.
icon and select Time-Laspe Search or Event Log Search or Sumnail
79