Camera Registration; Camera Scan Button - Idis DR-6100P Series Operation Manual

Camera Registration

Once Network Setup Wizard is complete, the system will
automatically enter Camera Registration mode and scan
for cameras connected to the NVR.
1
3

Camera Scan Button

1
Camera View Menus
2
Camera List Area
3
Video Display Area
4
Apply/Cancel Buttons
5
You can also register cameras on the remote
program. For more information on the remote camera
registration, refer to Registration on page 40.
2
4
5
Camera Scan Button
You can scan and search and register cameras that were
not detected automatically or third party cameras.
Pressing the Scan button displays the following
submenu.
Rescan
Scans for DirectIP™ cameras that were not scanned
automatically.
Third Party Scan
Used to manually scan for third-party cameras that
cannot be recognized by the auto scan feature.
Some functions may not be supported for the third-
party cameras depending on their protocol and model.
● Protocol: Select the protocol used by the camera (or
video encoder) you wish to search for.
Part 1 - Getting Started
13