Self-Diagnosis - Idis DR-6100P Series Operation Manual

Self-Diagnosis

Use this option to configure self-diagnostic settings.
This feature is also supported when connected to the
NVR from a remote program.
● Reports
– No.: Selects which reports to export.
– Time: Displays when you started the self-diagnosis.
– View a Report: Briefly displays whether the report
is "Good" or "Bad".
– : Click the + icon at the bottom left corner of
the screen to run the self-diagnosi.
– Export: Saves the Saves the reports to a storage
device, such as the USB port and NetFS site, by
converting them to HTML format. You can export
more than one report at a time by selecting
multiple reports.
– Auto Generating Interval: Select any time period
between 6 hours and 7 days.
• The reports are stored in up to 24 files. If you have
configured Auto Generating Interval as one-day
period, only the the reports from the last 24 days
can be viewed.
• If the NVR is turned off, the reports will
automatically turn off.
• The reports are organized by recent date and time.
● FailOver: Whene a problem is detected on the target
device, click the Run the failover button to resolve
the problem.
– Target Device.: Selects which device to run the
failover.
– Channels: Select the camera channel if a camera is
set to the target device.
– Action: Select the type of action to run the failover.
– Run the failover: Click the Run the failover
button when a fail is detected on the target device
to resolve the problem.
Once Run the failover have made to the camera, the
camera will reboot automatically.
Once you have run failover on the camera, the camera
will reboot automatically. By selecting System,
Network, Device Health Status, Storage Status, or
Camera Status, you can see the brief results of the self-
diagnosis for the target device.
The NVR self-diagnostic report can only be viewed in
text form.
This feature is also supported when connected to the
NVR from a remote program.
We recommend clicking the Export button at the
bottom of the list, which allows you to view the reports
on a PC web browser. We also recommend scanning
the self-diagnostic report on a remote program, which
allows you to view the reports in HTML format as shown
below.
Part 2 - Configuration
39