Camera System; Face Detection - Idis DR-6100P Series Operation Manual

Part 2 - Configuration

Camera System

The event occurs when the fan has stopped in the fan
mounted camera.
● No.: Select which cameras to apply Fan Error to.
● Actions: Specify which actions to take when a Fan
Error event occurs.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
– Notify: Configure to be notified of events by Mail,
LAN1 through 5, SNS, Push, and/or Alert Window.
– EventUpload: Uploads the video clips when an
event occurs.
– PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
• In order to use the Callback feature, the NVR
must be registered on the remote program.
• In case of the camera that not supports camera
system event, the camera system feature will
be disabled.
62

Face Detection

When face detection event occurs in the selected
camera, the area that the face is detected displays on
the screen.
● No.: Select which cameras to apply Face Detection to.
● Sensitivity: Set sensitivity settings between 1 (Low)
and 5 (High).
● Max. Detect Count: Set the maximum detected
number of face as 8 or 32.
When you set the Max. Detect Count as 32, the
sensitivity feature will be disabled.
● Min. Face Size: Select 120 x 120, 150 x 150, 180 x180,
210 x 210 or 240 x 240.
● Actions: Specify which actions to take when a Face
Detection event occurs.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
– Notify: Configure to be notified of events by Mail,
LAN1 through 5, SNS, Push, and/or Alert Window.
– EventUpload: Uploads the video clips when an
event occurs.
– PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
• In order to use the Callback feature, the NVR
must be registered on the remote program.
• In case of the camera that not supports face
detection event, the face detection feature will
be disabled.