Apply/Cancel Buttons
While in Camera Registration mode, select Apply
to register all changes. When selecting Apply, the
following message will be displayed. You can activate or
deactivate Self-diagnosis.
Select Cancel to exit Camera Registration mode without
applying the changes.
It is not possible to register a camera that has already
been registered to a different NVR.
Diagnosis Process
When the camera is registered to the NVR, Self-
diagnosis runs automatically for the new registered and
changed cameras.
If Self-diagnosis is processing, Diagnosis Processing
message will be displayed.
If Self-diagnosis is failed, Diagnosis Requirement
message will be displayed. In this case, you can run Self-
diagnosis manually. For more information, refer to the
Self-Diagnosis on page 39.
Part 1 - Getting Started
19