Table of Contents
Advertisement
Rear panel
The rear panel of the printer features the host interface connectors:
Bi-directional parallel IEEE 1284-B connector.
Twisted Pair 10/100baseT Ethernet connector.
The printer rear panel
The LED LNK is off when the printer is not installed on an Ethernet network, it
blinks while data is transmitted to the host.
The LED SPD is off when the card is set for 4 megabits-per-second (MBPS), on
when the card is set for 16 MBPS.
10
Phaser 2135 Color Printer
LEDs
Ethernet port
Parallel port
0728-03
Advertisement
Table of Contents
Troubleshooting
