1=Input Zones - Honeywell NOTIFIER SFP-10UD Series Manual

Programming
3.5.1 Input Zones
The Input Zones option allows the user to initially program or change the programming for the five
input zones (circuits) on the SFP-5UD or the ten input zones (circuits) on the SFP-10UD. Pressing
1, while viewing Programming Screen #1, will select the Input Zones option and display a screen
similar to the following:
PROGRAMMING

1=INPUT ZONES

2=NACS
3=RELAYS
Programming Screen #1
Pressing the down arrow key will display additional screens for Input Zones 4 through 5 in the
SFP-5UD or Input Zones 4 through 10 in the SFP-10UD. To program a specific zone, press the
number key corresponding to the desired zone while viewing one of the Input Zone screens. To
program Input Zone 1, press the 1 key while viewing Input Zone Screen #1. The following screens
will be displayed:
To change the programming for the displayed zone, press the keyboard 'down' arrow key to view
the Edit Zone screens.
62
PROGRAMMING
1=SYSTEM SETUP
2=OPTION MODULES
3=HISTORY
Programming Screen #2
PROGRAMMING
1=WALKTEST
2=CLEAR PROGRAM
3=PASSWORD CHANGE
Programming Screen #3
INPUT ZONES
1=ZONE 1
2=ZONE 2
3=ZONE 3
Input Zone Screen #1
PULL STATION
**********************
ZONE 1
PRESS TO EDIT
Edit Input Zone Screen #1
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C2 1/24/2012
Master Programming Level