Honeywell NOTIFIER SFP-10UD Series Manual page 109

Maintenance Programming Level
To change the date, press 2 while viewing the Time and Date Screen. The following screen will be
displayed:
A flashing cursor will appear on the left side of the display. Enter the two digit month, two digit
day and four digit year. The cursor will move one position to the right after each entry. When the
fourth digit of the year has been entered, the display will return to the Time and Date Screen which
will show the new date.
To change between 12 hour and 24 hour format, press 3 while viewing the Time and Date screen.
Each press of the 3 key will toggle the display between 12 HR and 24 HR format.
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C2 1/24/2012
ENTER DATE
**-**-****
MONTH DAY YEAR
11-15-2009
Date Screen
Programming
109