Fire Alarm Control Panel LT-32 / LT-159
14.6 System test – zones
1.
Follow the steps to enter in "Configuration" menu, select "Test" to access to the related options, then select "Zones" icon to view the Zone list.
2.
Click on the icon
near the Zone you would like to put in Test. The Test icon
example Z02. Press the back arrow
3.
To end the Test, click on the related Test icon
arrow
to go back to the main screen.
52
for go back to the main screen.
the Zone. The Enabled icon
will be displayed near the selected Zone and label will be updated; in this
will be displayed near the Zone and label will be updated. Press the back
M-168.1-SERIE-LT-EN / 08.2022