12: Service Terminal - Honeywell NOTIFIER SFP-10UD Series Manual

Read Status
4.19.12 Service Terminal
READ STATUS
1=CENTRAL STATION
2=PHONE LINES
3=SERVICE TERMINAL
Read Status Screen #4
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C2 1/24/2012
Pressing 1 for Superv Phone Line will cause the following screen to be displayed:
SUPERVISE PHONE LINE
PHONE LINE 2
This screen indicates whether or not Phone Line 2 is being supervised by the DACT. The factory
default setting is Phone Line 2 supervised (Yes).
Pressing 3 while viewing Read Status Screen #4 will display the following screens:
RING COUNT
The Ring Count is displayed as the first item in the Service Terminal Screen.
SERVICE TERMINAL
Service Terminal Screen
Operating Instructions
YES
03
127