Sending The Commissioning Sms To The Vitocom 100 - Viessmann Vitocom 100 Installation And Service Instructions For Contractors

Entering the SIM card PIN
2. Press / "to select Vitocom PIN
code input".
3. Confirm with OK.

Sending the commissioning SMS to the Vitocom 100

1. Entering the access code
The access code protects the
Vitocom 100 against misuse.
In the delivered condition, the access
code has been set to 1111.
Note
Following the commissioning of the
Vitocom 100 we recommend chang-
ing the access code (see page 23).
2. Entering the language
Select the language abbreviation from
the table on page 24.
Between the access code and the lan-
guage abbreviation enter a space þ .
Reply SMS
The sender will immediately receive two
SMS replies. Both SMS messages con-
tain a list of the SMS commands. The
sender's mobile phone number is
already stored under "MOBNR1".
(cont.)
4. Press / to enter the PIN digits one
by one.
Press / to move to the next posi-
tion.
5. Confirm with OK.
The following text is transmitted to the
mobile phone number of the Vitocom
100:
Commissioning SMS in English (en)
1111þen
The Vitocom 100 automatically recogni-
ses and saves the mobile phone number
of the sender.
1st reply SMS
1111
CODE
INFO
MOBNR1 "017..."
MOBNR2
BAHKx
x=1...3
Commissioning
21