Commissioning
Commissioning sequence
After the Vitotrol 350 has first been connected to the
power supply, the user will be guided through an auto-
matic commissioning sequence.
Select language
The display shows the following screen:
Language
Deutsch
Polskie
Espanol
Italiano
Fig. 9
Defining CAN modules
The display shows the following screen:
Configuration, modules 1/2
Fig. 10
System version without controller module
The following screen will be displayed if no controller
module has been connected (number "0"):
12
OK
1
OK
Information
Not every element in the footer will be available when
first taking the unit into use.
1. Tap on the required field to select the language.
Note
A field with a bright background is already enabled.
2. Press "OK" to confirm
1. Select the number of controller modules with
2. Press "OK" to confirm
Selecting the system version
Without controller module: See page 12
With 1 to 5 controller modules: See page 13
Configuration, modules 1/2
No regulated circuits configured
Fig. 11
/
.
|
~
OK