Installation Sequence; Installing The Vitocom 100 - Viessmann Vitocom 100 Installation And Service Instructions For Contractors
Type gsm remote monitoring and remote control of heating systemsv
Hide thumbs
Also See for Vitocom 100:
- Installation and service instructions for contractors (44 pages) ,
- Installation and service instructions manual (44 pages) ,
- Operating instructions manual (44 pages)
Table of Contents
Advertisement
Installing the Vitocom 100
Information on installation location:
■ Adequate strength of reception.
Note
Adequate strength of reception using
a mobile phone and a SIM card from
same mobile phone operator, see
page 32.
■ Maintain the max. cable length (total
length of all cable lengths of KM BUS
subscribers up to 50 m)
■ Power plug of the Vitocom 100 must
be easily accessible.
1.
Install the aerial (not extendible) in a
favourable location:
■ To a suitable metal surface using the
magnet that is integrated in the aerial.
■ To a smooth, clean and dry surface
using the adhesive pad provided.
2.
3. 4x
Installation sequence
9
Advertisement
Table of Contents
