Setting Switches - Omron SYSMAC 3G8F5-CLK11-E Operation Manual

Controller link support boards
Hide thumbs Also See for SYSMAC 3G8F5-CLK11-E:
Table of Contents

Advertisement

Connecting Optical-system Cables

2-1-2 Setting Switches

Setting the Memory Area
The following settings must be made on on a Controller Link Support Board.
Setting item
Memory address
Interrupt level
Terminating resistance
(Wired Boards only)
Note
1. Always turn the computer OFF before changing switch or pin settings.
2. The memory address and interrupt level must be set before the Board is
installed in the computer.
3. Set the baud rate (Wired Boards only), node address, and unit number as
options in the CONFIG.SYS of Controller Link BIOS.
Using the memory allocation switch (DIP switch), set the base address of the
memory area to be used by the Controller Link Support Board within the memory
of the computer. The area can be set within the following range providing the
area does not overlap another resource currently used the computer.
SW1 SW2 SW3 SW4
ON
ON
ON
OFF
ON
ON
ON
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
OFF
ON
ON
ON
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
*Factory default setting.
Note
1. Set the memory area so that it does not overlap another resource on the
computer.
2. The base address is set to C8000 Hex by default.
3. If the memory area overlaps another resource, the computer will not start
normally.
4. The memory area used by the Controller Link Support Board must not be set
to Shadow RAM.
Setting section
Memory allocation switch
Interrupt short pin
Terminating resistance switch
(This diagram shows the
factory default setting.)
Base address
ON
C0000 Hex
ON
C2000 Hex
ON
C4000 Hex
ON
C6000 Hex
ON
C8000 Hex*
ON
CA000 Hex
ON
CC000 Hex
ON
CE000 Hex
OFF
D0000 Hex
OFF
D2000 Hex
OFF
D4000 Hex
OFF
D6000 Hex
OFF
D8000 Hex
OFF
DA000 Hex
OFF
DC000 Hex
OFF
DE000 Hex
Section
Page
25
26
26
Memory used
C0000 to C1FFF Hex
C2000 to C3FFF Hex
C4000 to C5FFF Hex
C6000 to C7FFF Hex
C8000 to C9FFF Hex*
CA000 to CBFFF Hex
CC000 to CDFFF Hex
CE000 to CFFFF Hex
D0000 to D1FFF Hex
D2000 to D3FFF Hex
D4000 to D5FFF Hex
D6000 to D7FFF Hex
D8000 to D9FFF Hex
DA000 to DBFFF Hex
DC000 to DDFFF Hex
DE000 to DFFFF Hex
2-1
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sysmac 3g8f5-clk21-e

Table of Contents