Intended Audience; General Precautions; Safety Precautions; Operating Environment Precautions - Omron SYSMAC 3G8F5-CLK11-E Operation Manual

Operating Environment Precautions

1

Intended Audience

2

General Precautions

WARNING
!
3

Safety Precautions

WARNING
!
WARNING
!
! Caution
4 Operating Environment Precautions
xii
This manual is intended for the following personnel, who must also have knowl-
edge of electrical systems (an electrical engineer or the equivalent).
Personnel in charge of installing FA systems.
Personnel in charge of designing FA systems.
Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifications
described in the operation manuals.
Before using the product under conditions which are not described in the manual
or applying the product to nuclear control systems, railroad systems, aviation
systems, vehicles, combustion systems, medical equipment, amusement
machines, safety equipment, and other systems, machines, and equipment that
may have a serious influence on lives and property if used improperly, consult
your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide the
systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Controller
Link Support Board and related devices. Be sure to read this manual before
attempting to use the software and keep this manual close at hand for reference
during operation.
It is extremely important that a Controller Link Support Board and all related
devices be used for the specified purpose and under the specified conditions,
especially in applications that can directly or indirectly affect human life. You
must consult with your OMRON representative before applying a Controller Link
Support Board to the above mentioned applications.
Never attempt to disassemble any Controller Link Support Board while power is
being supplied. Doing so may result in serious electrical shock or electrocution.
Never touch any of the terminals while power is being supplied. Doing so may
result in serious electrical shock or electrocution.
Tighten the connector screws for the backup power supply to the torque speci-
fied in this manual. The loose screws may result in burning or malfunction.
Do not operate the control system in the following places.
Where the Controller Link Support Board is exposed to direct sunlight.
Where the ambient temperature is below 5 C or over 45 C.
Where the Controller Link Support Board may be affected by condensation
due to radical temperature changes.
Where the ambient humidity is below 8% or over 80%.
4