Chapter 3: Installation; Important Notice - Enterasys Matrix 7G4202-72 Hardware Installation Manual

Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Read the Release Notes shipped with the DFE-Platinum module to check for any exceptions to the supported
features and operation documented in this guide.
This chapter provides the instructions to install the 7G4202‐72 and 7G4282‐49 DFE‐Platinum
modules.
Note: Unless otherwise noted, the installation instructions apply to both DFE-Platinum modules.
Follow the order of the sections listed below to correctly install the modules.
For information about...
Unpacking the DFE-Platinum Module
Installing Optional Network Expansion Modules (NEMs)
Backplane Connections and Installation Rules
Installing Module into Matrix E7 or Matrix N7 Chassis
Installing Module into Matrix N1, N3, or N5 Chassis
Connecting to the Network
Connecting to COM Port for Local Management
Completing the Installation

Important Notice

DFE-Platinum Series Hardware Installation Guide 3-1
3
Installation
Refer to page...
3-2
3-2
3-2
3-5
3-8
3-9
3-12
3-17