Appendix A: Specifications; Dfe-Platinum Module Specifications - Enterasys Matrix 7G4202-72 Hardware Installation Manual

This appendix provides information about the following:
For information about...

DFE-Platinum Module Specifications

COM Port Pinout Assignments
Regulatory Compliance
Enterasys Networks reserves the right to change the specifications at any time without notice.
DFE-Platinum Module Specifications
Table A‐1 provides the I/O ports, processors and memory, physical, and environmental module
specifications for the 7G4202‐72 and 7G4282‐49. Unless noted differently, the specifications apply
to both DFE modules.
Table A-1 Specifications
Item
7G4202-72 Ports
Ports 1 through 72
7G4282-49 Ports
Ports 1 through 48
Option Slot
Processors/Memory
Processor
Dynamic Random Access
Memory (DRAM)
FLASH Memory
Specification
Seventy-two 10BASE-T/100BASE-TX/1000BASE-T compliant ports
through seventy-two RJ45 connectors.
Forty-eight 10BASE-T/100BASE-TX/1000BASE-T compliant ports
through forty-eight RJ45 connectors.
Supports one optional network expansion module (NEM).
MPC750CX, 400 MHz processor
256 MB
32 MB
DFE-Platinum Series Hardware Installation Guide A-1
A
Specifications
Refer to page...
A-1
A-2
A-3