1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications
MGBIC-LC05 Specifications (100BASE-FX)
Table A-12 MGBIC-LC05 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
MGBIC-LC07 Specifications (1000BASE-ELX)
Table A-13 MGBIC-LC07 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 110 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment.
The Link Power Budget must not exceed those specified in this table. The MGBIC-LC07 input power must not
exceed -9 dBm. Otherwise, saturation could occur.
Table A-14 MGBIC-LC07 Operating Range
Item
9 or 10 µm SMF
MGBIC-08 Specifications (1000BASE-ELX)
Table A-15 MGBIC-08 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 80 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment.
The Link Power Budget must not exceed those specified in this table. The MGBIC-08 input power must not
exceed -3 dBm. Otherwise, saturation could occur.
Table A-16 MGBIC-08 Operating Range
Item
9 or 10 µm SMF
A-6 Specifications
10 µm SMF
-15 dBm
-25 dBm
10 dBm
-2 dBm, min.
-30 dBm, min.
-9 dBm
1
28 dB
1550 nm
N/A
-0 dBm, min.
-24 dBm, min.
-3 dBm
1
23 dB
1550 nm
N/A
Range
110,000 Meters
+2 dBm, typical
+5 dBm, max.
-26 dBm, typical
28 dB, typical
Range
80,000 Meters